Vise test - comparisons. Com 2024

The vice serves to hold a workpiece in order to machine it. To hold serve jaws, between which the workpiece is firmly clamped. One of the jaws is fixed and the other is pressed against it by means of a spindle and holds the workpiece to be machined in a fixed position. They can be attached to a table by means of a screw clamp, screwed firmly to the substrate or clamped directly into machine tables. Depending on the design, a distinction is made between parallel vise, machine vise and pipe vise. How these are structured and what you can do with them is ours Vise comparison from Test-Vergleiche.com in a guide. At the same time we want to give you a purchase advice and inform you on what you at Buy vise You must pay attention to you Vise experiences inform other customers and ours Vise comparison winner introduce.

Top product vise:

Vise - the iron hand can grab

Every workshop and every hobbyist needs a reliable vice. A vise is part of the basic equipment of a workbench and you can buy it for a small amount of money. Whether you want to bend sheet metal, straightening or sawing, flexing or welding workpieces, for all these works gets Vise the best Grades in terms of work aids. But next to this rough work, the the best vise make it possible, the precision should also be correct, so that you can also work precisely.

What is available for different types of vices?

How is a vice built?

We will describe how a vise is constructed using a parallel vise, the most commonly used model. In principle, a vice always works with two jaws, between which the workpiece is clamped.

• The back jaw is firmly connected to the vice, while the front jaw sits on a guide rail and can be moved back and forth by means of a spindle.
• The two jaws are usually grooved or at least roughened so that the workpiece can not slip out.
• With the vise spindle, the span of the vise can be adapted to the workpiece to be clamped. The spindle has a trapezoidal thread which rotates in the spindle nut.
• The spindle nut is firmly connected to the housing and not visible from the outside.
• The spindle is turned with a crank. The jaws are always exactly parallel to each other.
• Behind the jaws is often a small anvil
• What is important in a vise and which models are recommended can be found in the following text.

Buy a Vise - Forged or Cast?

The Vise offer is big, but most models are made of metal. There are also the Wood vise for the woodworking craft or the wood parallel vise, but the most common vices for the metalworking craft and the hobbyist are made of cast iron or forged steel. Whether forged or cast, the functionality remains the same, but there are differences.

Cast variant

These vices are usually made of iron, steel or gray cast iron. When pouring, many smaller cavities often form inside. In addition, the surface tends to become brittle and porous as it cools. Therefore, cast models are usually less robust and precise than forged ones. They tend to warp under heavier loads, which is why, over time, cast vices can no longer be clamped parallel or flush. Therefore, the cast vice is more for home and hobby use.

Forged variant

Forged vices are often made of hardened steel. It is usually an unbreakable quality tool that lasts a lifetime. Since forged vices are very expensive, we would rather recommend them to professionals.

A vice made of cast iron or cast steel is usually cheaper to buy, but the casting models are far from the robustness and longevity of a steel forged Metal vise approach.

If you are looking for a robust and resilient vice made of forged steel, you should avoid an inexpensive vice and rather look at the unbreakable models of a Brockhaus Heuer vice or BGS.

For occasional use, however, an ordinary cast vise is completely sufficient.

Professional vise or vice cheap?

If you want to know how much you cost a good vise, you have to pay attention mainly to three factors.

• Quality - Cast or forged.
• Size - Jaw width, clamping width & clamping depth
• Manufacturers - Brand manufacturer or no-name product

In the best case, you can have a simply made Parallel vise buy cheap for 50 Euro. At a high quality Professional parallel vise however, depending on the manufacturer you have to expect a price of 100 up to 500 Euro.

In practice, the following price ranges have proven to which you can roughly follow:

Purchase criteria for your bestseller vise

No matter if you are a new one Toolbox buy, one rechargeable drill or an eccentric sander, as with any new tool, you should also pay attention to the decisive selection criteria when buying a vise.

important functions

Simple or functional? This question can not be answered so easily. What the one needs is unimportant for the other. In our Vise comparison or parallel vise comparison, we would like to introduce you to some useful features. Whether this to your personal Vise test winner You have to decide for yourself.

Vise rotatable or parallel vice rotatable

The rotatable vise is very flexible and offers significant work relief and time savings. It can be locked exactly in the position required for processing. The firmly clamped workpiece can thus be turned with the vice without having to unclamp it. Ideally, such a vice can be rotated 360 °. Such a turntable can also be retrofitted with some manufacturers.

Vise height adjustable or parallel vise height adjustable

With a height-adjustable vise, a very economical work is possible because the working height can be adjusted individually.

Vice between parallel vice and anvil

Parallel vices are also often referred to as anvil vices. The anvil is a small flat ground working surface behind the fixed jaw. These vices are made of cast iron or forged steel.

Where should you buy your vise?

There are several ways to purchase your vise. The fastest way is in the local hardware stores or at specialist dealers. But you can also do yours Order vise online or at eviction sales Vice reduced purchase. Here are a few pros and cons to buy the vise:

Vice Manufacturers and brands

The bestseller vise at the moment are:

Is there a foundation commodity test vise test?

The search term Vice Unfortunately, there is no entry at the Stiftung Warentest portal, so we can give you their personal Vise test winner unfortunately can not imagine. However, the do-it-yourself magazine "Selbst ist der Mann" carried out a vice test in its 02/2014 issue. Vise test winner Here was the Brockhaus Heuer vise, front 120 mm with and without turntable.

Other Vise tests see also on the page even editorial staff under http://www.selbst.de/test-technik-artikel/weitere-tests/schraubstoecke-im-test-155979.html.

Video: Top Product Vise Brockhaus Heuer | Test Brockhaus Heuer

Conclusion

To a workshop equipment also includes a good vise. It is used for fixed clamping of workpieces in order to be able to process them afterwards. Whether steel forged or cast, the function is the same, but there are differences in quality and price. A cast vise is usually the cheaper option, but the steel-forged models are much more robust and durable, and therefore have a higher price.