Linseed oil OLI-NATURA linoleum varnish, 1 liter, colorless

ORGANIC SURFACE PROTECTION FROM PURE CLEANSING OIL WITH 0,4% LEAD AND COBALT-FREE DRY MATERIALS FOR TREATING WOOD IN THE INTERIOR AND EXTERIOR. The surface treatment with linseed oil varnish is a traditional and well-tried way to protect wood indoors and outdoors biologically. Linseed oil dries significantly faster than pure linseed oil and is produced in a gentle cooking process exclusively from cold-pressed linseed oil and dry matter. Linseed oil varnish is 100% solvent-free. In addition to furniture, doors, countertops, wall coverings, beams, fences, etc., also cotto tiles and cork surfaces can be incorporated. The surface is breathable, provides good protection against water and is easy to revise. Even weathered surfaces do not tear or shed. Linseed oil varnish has a deepening effect on the color and gives bright woods a warm honey tone. Recommended installation: Stir oil well / shake well. Apply evenly thinly with a brush / brush and avoid excess as much as possible, or remove after 30 minutes exposure time with a lint-free cotton cloth. The surface should appear evenly dull. Note: Excess oil that has not been completely absorbed by the wood marks itself as a wet puddle or spot after 30 minute exposure time. If these surpluses are not removed, these sites will only dry with considerable delay and remain sticky for a long time, resulting in glittering differences. After sufficient drying of 16-24 hours, a second application can be made if necessary, as described. Drying: Depending on the humidity and temperature, the oiled surface after 1-2 hours is dust-dry and reworkable after 16-24 hours. Full cure is achieved after 21 days. Treat gently during this time.