Type | soil tester |
Brand | PandaHug |
comparison result | TOP Productstest-vergleiche.com1,9good |
Manufacturers | PandaHug 4 in 1 soil tester |
PH measurement range | 3,5 - 9 |
light irradiation | 9 levels |
Gesamtlänge | k. A. |
Soil temperature | Ja |
Battery | 9 Volt |
PH value | 12 levels |
Digital display | Ja |
Max. Measuring depth | 10 cm |
Humidity | 5 levels |
Benefits |
|
Note: If the earth is very dry, the pointer of the measuring device will not deflect. This means that you have to water the plants immediately. Promotes the health of the plants. With this measuring device, you will get to know your soil better and can rely on specific measured values when caring for your plants. So you know when it's time to water. Whether the floor is dry and needs water, or whether it is damp and can dry out for a day. You will never water your plants too much or too little again. Application: First, press the [PH / ° C] button on the back to the ° C position. Step 1: Insert the probe into the ground about 5-10 cm. Press the NO button to start the measurement. Step 2: Adjust the position of the probe until the pointer on the scale deflects slightly. Step 3: After 10 minutes, note the moisture on the LCD screen. Step 4: Pull the probe out of the floor and wipe it after each use. Tips: 1. Use fine sandpaper to gently grind the probe to keep it clean and dry, and then use it. 2. Avoid contact with stones or hard objects, otherwise the probe can be easily damaged. 3. Do not hold the probe in water for too long, it may damage it. Do not use the probe to test hard floors or surfaces. 4. After each use, pull the probe out of the floor and wipe it. Properties: Moisture range: 1-3 dry (DRY), 4-7 normal (NOR), 8-10 wet (WET). Package content: 1 x moisture meter