Grip pliers test - comparisons. Com 2024

Grip pliers, helpers in need

You need a third hand or the screw connection can not be solved? Here a locking pliers, also called Gripzange, remedy. Thanks to a special mechanism, high leverage can be applied with simultaneous clamping action.

For certain work, grip pliers are essential. That's why we did that once Grip pliers offer looked at the trade to give you some the best grip pliers imagine. Our guide is meant to give you the same time Buy grip pliers facilitate and point out the most important purchase criteria.

Top product: Grip pliers at Amazon

What is a grip pliers?

A grip pliers is a tool in which the opening width of the clamping area can be adjusted by means of a screw to clamp it to a workpiece. A so-called toggle mechanism serves the purpose of transmitting high forces. The clamping effect ensures that you do not hold the pliers pressed shut, but only have to perform the desired movement. To release the pliers, a lever is pushed back, which releases the workpiece again.

The following application areas are for the use of a good grip pliers conceivable:

• to hold together two workpieces, if one has no hand free
• for fixing two workpieces during welding
• when screwing two workpieces must be fixed against each other
• if you want to solve difficult to solve nuts or screws
• when screw or nut heads are deformed

How does a grip pliers work?

The grip pliers act by the lever principle in connection with a clamping action. The material to be processed can be securely clamped in order to process it afterwards. The grip pliers can be adjusted exactly to the right width to carry out a variety of tasks. Especially when welding, drilling or similar machining processes, the grip pliers replace the third hand.

To set the pliers, it must first be opened and pushed to the desired position. The lower handle is pressed firmly upwards, but be careful not to damage the workpiece. For protection, a piece of fabric can be placed so that the jaws leave no scratches on the surface. Hold the pressure and turn the screw that sits at the end until the grip pliers hold securely. Tighten the screw until the jaws are tight. If pressure is subsequently exerted on one of the levers, the construction is released again.

Which baking forms are there?

The most important purchase argument when choosing a grip pliers is the shape of the clamping jaws. The different jaw shape is suitable for gripping and holding different materials. The most common is the curved or rounded shape of the jaws. For what the individual forms are suitable, you will learn here:

What is there for different pliers?

Who looks at the selection of pliers in the hardware stores, will see how varied the pliers offer. There is the right pliers for every application and every material. Pliers are usually divided into two groups:

1. Pliers to hold - The typical representatives of the holding tools in the pliers area are flat-nose pliers, water pump pliers, pipe wrenches and grip pliers.
2. Pliers for cutting - Pliers for cutting are, for example, the side cutter or the tile pliers.

Here are a few typical representatives in the pliers offer:

• Combination pliers - for bending wires or flat material, for cutting wires and for tightening screws
• Round pliers - with it wire or flat material can be bent around
• Flat nose pliers - it is used for cutting and separating.
• Water pump pliers - used for tightening fittings and fittings
• Side cutter - it is needed to cut through cables, wires or other materials

Grip pliers from BGS

Where can I buy grip pliers?

Grip pliers are available in almost every hardware store. Take a look for that  Hornbach grip pliers offer or after Bauhaus grip pliers, Another option is to use the internet. Here you have the best overview but also spoiled for choice which Grip pliers cheaper is. For this purpose, many customer reviews are available on the Internet as decision-making aid Grip pliers experience reports and Grip pliers reviews the properties. In addition, you will certainly get more on the Internet Welder grip pliers than in local commerce.

Who makes the best grip pliers?

The manufacturers are a few manufacturers who score with good to best quality. So are Gedore grip pliers very popular in the craft sector. Also Knipex is one of the manufacturers who like to be bought or the Würth grip pliers. But Draper, BGS or Stanley have made a name for themselves. There are many, many more that we can not name all here. Take a look around the portals yourself. If you have found the right one, you should immediately choose your one Order Grip Pliers online, because finding them in the hardware store will be difficult, as there are usually only a small selection of products and special requests for specific models have to be ordered first.

What does Stiftung Warentest say about a grip pliers test report?

Unfortunately, we did not find any tests for pliers, only a reference to the book “Repairs at Home”, so we cannot offer you any Grip pliers test winner able to imagine. We can only serve as Grip pliers recommendation recommend various artisan portals. Here you will find more and find out interesting facts about the locking pliers.

Conclusion grip pliers

A grip pliers should not in any toolbox absence. It can be used to solve many problems. As a third hand, the clamp is at least not to be underestimated.