Longboard Test - Comparisons. Com 2024

Downhill Longboards

Downhill Longboards are sturdy and built with low center of gravity. Thus, at mountain slopes speeds up to 100 km / h can be achieved. Due to the sturdy construction, the board does not start to lurch like a carving longboard and get out of control.

• Atomic Longboard

Carving longboards

Carving Longboards are the cruiser among the boards. They are not designed for high speeds, but have recesses that allow even tighter turns. A carving board is ideal for driving around in the city and is also good for beginners.

• VINGO Longboard

Freeride Longboards

The Freeride Longboard is symmetrically shaped so that both sides can be used. On the other hand, it has a low center of gravity, so that the Freeride Longboard is considered an entry-level version for the downhill longboard. Undecided, fast driving, but also want to trick, are well advised here.

• FunTomia Longboard
• Life Art Longboard
• Apollo longboard

As a deck one refers to the board itself, so the tread, usually ornately decorated from below. The eye is familiar with, but you should also take care of the "inner values":

• The Flex: The so-called Flex value denotes the bending of the deck under load. The more layers the deck has, the lower its flex. Maple decks with 9 layers as they are in our Longboard comparison occur, have a low flex value. Bamboo fiberglass decks with 5 or 2 layers are much more flexible and are preferred by light persons.
• The shape of the deck has not only aesthetic reasons, but also technical. Depending on how large the recesses are on the wheels, narrower or more curves can be driven.

The Longboard axles are attached directly to the deck and play a big role in steering and handling. Very widespread Cast aluminum-axisAlso Cast trucks called. The premier class among the longboard axles are the so-called Precision Trucks which are milled from an aluminum block. They are considered virtually indestructible and are very accurate in steering behavior.

The ball bearings are probably the most needy part of the whole board. If they are dirty or sent, neither a beginner nor a professional will be able to drive properly. Therefore, it is always special to them Attention to care to give. Ball bearing made of chrome are very common because they are cruising and tricks without hesitation. The alternative, ceramic ball bearings, should be considered in downhill longboards. Ceramic ball bearings are designed for high speeds.

As with everyone Component of a longboard There are also a variety of values ​​and indicators on the wheels. So will the Hardness of the longboard wheels in A indicated (see Longboard comparison). The ideal wheels should be a compromise of hardness, traction, smoothness and slide ability. For beginners, softer roles are usually beneficial because they have more grip and are less fast.

1. Is there a longboard test online?

Stiftung Warentest has already tested many everyday products thoroughly. An explicit one Longboard test was unfortunately not among them, perhaps because the blanket determination of a longboard test winner is very difficult and individual. However, there are a number of reports and articles that are very interesting for longboarders and skaters. For example, the Titus T-Tool in 2012 was rated as pollutant-heavy. Stiftung Warentest has also been active in the field of protective helmets and protectors. For example, an article from the 23.10.2003 states that protective clothing should comply with the applicable standard and that it makes sense to pay attention to it when purchasing it. You should always carry out a longboard test yourself. Practice is known to do the trick and if a board really suits you no one else can judge for you. Therefore our advice is: Try it! Stand on it and try it out! That is still the best longboard testthat exists.

2. Where is the longboard allowed?

A longboard is assessed by the Highway Code similar to a wheelchair or a self-balancing scooter, ie It may only be operated on sidewalks. Also bike paths are unfortunately taboo, as they are reserved for cyclists.

3. Which shoes and clothes should you wear?

Since the deck is standard with Griptape covered, you have a good grip with almost all shoes. running Shoes or Trekking Shoes However, they are particularly well suited because they give the foot a stable hold and protect the joints and tendons by suspension. Furthermore, you should wear comfortable clothing that does not restrict you. protective clothing, as a Helmet, Knee and elbow pads are especially recommended for beginners. Also Training Gloves are useful, as they protect the palms in a fall from painful abrasions.

Mike Jucker Hawaii Longboard

RollerCoaster Longboard

Hudora longboard